Preparing 

1. Temperature room temperature is best for decal install.
2. Tools For Dry Install
   
   • Cleaning Solution (soapy water or rubbing alcohol)
   • Paper Towels
   • Masking tap
   • Scissors
   • Tape measure
   • Squeegee (use credit card or small, flat hard edged object.
3. Tools For Wet Install
• Cleaning solution (soapy water or rubbing alcohol)
• Tap water
• Paper Towels or dry cloths
• Squeegee (use credit card or small, flat hard edged object.

Dry Install

1. Clean car surface with soapy water or rubbing alcohol and dry surface with paper towel or cloth.
2. Align decal on surface using masking tape.
3. Peel and cut bottom half of backing paper.
4. Squeegee can be used to press and apply decal on car surface. be careful avoid leaving bubbles.
5. Peel other half backing paper and repeat step 4
6. Clear out all bubbles and carefully remove white masking paper.

Wet Install

1. Clean car surface with soapy water or rubbing alcohol and dry surface with paper towel or cloth.
2. Peel backing paper and spray tap water (do not use soapy water or alcohol) on surface and sticky part of decal.
3. Squeegee out excess moisture from middle of decal toward outer edges, once all liquid is squeegeed out let it dry for some time and remove masking white tape.